Independent. Open source. Yours.Open the builder

WHAT’S BEHIND THE BUILD

Open by design.
Local by default.

An independent community fork of SeedSigner 0.8.7. Your GBA game and SeedSigner share one SD card image, configured in your browser for a supported Pi Zero 1.3 display profile.

Your file stays yours.

The builder reads your .gba file, or extracts one GBA game from your ZIP, in browser memory. It downloads a public template with no game ROM, verifies its checksums, adds your game and creates a personal IMG and checksum file. Your ROM is never uploaded.

There are no accounts, analytics or third-party scripts. Fonts and images are hosted with the site. GitHub Pages receives normal requests for the site’s files and may log connection information. Local ROM processing does not make a website visit anonymous.

The builder never writes your SD card. You download the IMG and write it using a separate tool such as Raspberry Pi Imager. The image is lost from browser memory when you close the page, so download it before leaving.

Match the hardware.

The board target is Raspberry Pi Zero 1.3. Selecting a display profile changes the game layout and SeedSigner display settings; it does not make unrelated boards or displays compatible.

ProfileHardwareValidation limit
Larger (Plus / Play)320 × 240 ST7789 Plus HATShared display profile. Confirm Pi Zero 1.3, display and HAT match. Full physical qualification remains pending.
Regular240 × 240 Waveshare 1.3-inch HATSoftware checked. Full physical display, button, camera and signing qualification remains pending.

The hardware illustrations preserve each reference model’s distinct enclosure and controls. They use approximate proportions and example software screens, not photographs of tested devices. They do not establish the board, wiring or display controller inside an individual device. Read the hardware evidence and primary sources.

Games, within limits.

This version accepts GBA games up to 32 MiB, or a ZIP up to 40 MiB containing exactly one .gba file. Standard controls are D-pad, A, B, Start and Select. The D-pad directions, center click and three side buttons provide eight physical inputs; GBA has ten. Advanced can map L/R to existing buttons, replacing their previous assignments, disable an input or use the racing preset’s combined actions. Games that require all ten distinct inputs may not fit this layout. Game audio and persistent game saves are not provided. Emulator compatibility and speed vary.

Basic use needs only your display and game. V-Rally 3 is detected automatically and uses a dedicated racing preset. Advanced lets you change each of the eight HAT buttons and the SeedSigner shortcut. The other games shown are examples to source separately; no commercial or homebrew ROM is included in the public template. A file passing validation is not proof of playability.

Classic NES Mario compatibility: Super Mario Bros. (FSME) automatically uses a separate patched emulator. The original game file reaches the title and World 1-1 with movement and jumps in ARMv6 software tests. The original emulator remains in use for other games. Physical Pi Zero performance still needs confirmation.

Examples and evidence

  • Crash Bandicoot: The Huge Adventure — creator tested. The creator personally reported it working well on October 12, 2026. Hardware, display profile and build version were not specified.
  • V-Rally 3 — creator tested. Reported working on November 15, 2026. Exact hardware, build version and complete control coverage were not specified. The dedicated racing preset is selected automatically.
  • Pokémon Ruby — creator tested. Reported working on November 15, 2026. Exact hardware, build version and complete control coverage were not specified. Sapphire remains untested. The screenshot is an official Nintendo example; persistent saves are not available and progress is lost when the session ends.
  • Classic NES Series: Super Mario Bros. — software checked. World 1-1 movement, jumps, question blocks and a Goomba stomp were captured with the ARMv6 runtime under software emulation. Physical gameplay and speed remain unverified.
  • Google Dino GBA port: an endless runner with jump and duck controls.
  • Video Poker v0.6.6: a separate IMG for the 320 × 240 Plus / Play hardware, with twelve games, hints, autoplay and a hidden trainer. It is not a GBA ROM and cannot be added through this builder. Its two-second top + bottom shortcut opens the trainer; this release does not switch into SeedSigner.
  • 2048 Advance: uses D-pad, Start and Select.

Crash, V-Rally 3 and Pokémon Ruby have creator-reported gameplay checks, not complete hardware or control qualification. An earlier Dino hardware build was played. Pokémon Sapphire and 2048 gameplay on this fork remain untested. Compatibility and speed vary; check whether each game needs controls that your chosen mapping leaves out.

The images are captured game frames, not promises of performance on your device. See the game-frame source record. Games and their artwork retain their respective creators’ rights.

Experimental.
Know the scope.

Baseline software checks, image readback and browser integration results are recorded in the validation record. The v0.2.4 Advanced validation record adds strict configuration, custom mapping and shortcut recovery tests, ARMv6 software checks, and browser-engine assembly/readback. These checks establish software behavior; they do not replace a physical device test or confirm game playability.

Full physical qualification of the generated images, including cold-boot, display, buttons, sustained gameplay, camera and signing, remains pending. The creator-reported Crash, V-Rally 3 and Pokémon Ruby gameplay results are narrower checks. This fork has not received an independent security audit. Use disposable test seeds while qualifying the build.

The game and SeedSigner share one operating system. By default, hold KEY1 + KEY3 for two seconds, then release every button for 80 ms to open SeedSigner. Advanced can select two or three physical HAT buttons, a hold time from 0.5 to 10 seconds, and a release time from 50 to 1,000 ms. The shortcut uses physical buttons independently of game mapping; use the shortcut shown with your download. This entry gesture is an interface gate, not authentication or a security isolation boundary.

Never enter a seed into this website. This is an independent community project, not an official or endorsed SeedSigner, BitKit or Strike release.

Source you can inspect.

Third-party components and user-supplied ROMs retain their own licenses. The project’s GPL does not grant rights to game ROMs, screenshots or manufacturer photographs.

Credits & illustration references.

  • Hardware illustrations: original, inspectable SVG artwork. Play follows the BitKit Play enclosure and exposed tactile-switch layout, with its maker-listed 76 × 99 mm front proportions. Plus follows the SeedSigner Plus reference CAD, with its capsule shape, display opening and eight separate button positions; the BitKit Plus photograph provides a second reference. Regular follows the wide enclosure, square display, joystick and three action buttons shown by Bitcoin Design Guide contributors (CC BY 4.0).
  • Illustration scope: perspective, materials and comparative size are illustrative. Plus CAD dimensions are reference-design dimensions, not a measurement of a BitKit device. Regular case dimensions are unconfirmed. The V-Rally 3, Pokémon, Doom and Celeste Classic 2 example screens are composites of credited game frames; they are not evidence of device tests. Game frames retain their aspect ratio and use the full LCD aperture. Widescreen games fill the LCD width with black letterboxing above and below; SeedSigner’s splash and Home screens fit the same aperture without cropping. The regular display fills its square LCD with Celeste’s native square gameplay area, clipping only black capture padding. No manufacturer photograph is embedded in the SVGs.
  • Scroll scene: Real Super Mario Bros. gameplay captures, controlled entirely by scrolling, followed by the splash and Home screens rendered from the official SeedSigner 0.8.7 UI. Software previews, not device-test evidence. Mario capture details and credits · SeedSigner screen sources.
  • Inter: the Inter project contributors, self-hosted under the SIL Open Font License.
  • Game frames: credited captures from the referenced games. All game artwork retains its creators’ rights. Attribution, capture details and rights status are recorded in game-frame sources; the underlying games are not distributed by this site.

Illustration references, file hashes and rights status · Hardware research notes